Top One Innovator & Manufacturer of Circular Conveyor System in China!
Facebook
LinkedIn
TikTok
YouTube
E-Mail
Circular Conveyor System Manufacturer
Menu
MENU
MENU
Home
About C Motion
Circular Motion
Circular Conveyor System
Oval Circular Conveyor System
Rectangular Circular Conveyor Line
Belt Drive Circular Conveyor Line
Chain Drive Circular Conveyor System
Closed‑Loop Curved Round Conveyor
IP65 Dust Proof Circular Conveyor Line
Vertically-Mounted Single Rail Circular Conveyor Line
Vertically-Mounted Dura Parallel Circular Rail Conveyor System
News
Technical Guide
DownLoad
Contact Us
Positioning Accuracy Control of Circular Guide Rail Conveyor
Home
Positioning Accuracy Control of Circular Guide Rail Conveyor
Where a Loop Loses Its Precision in Circular Conveyor System: Circular Guide Rail Joint Accuracy
September 18, 2026
Technical Guide
Circular Guide Rail Joint Accuracy: Where a Loop Loses Its Precision Author:ChangMing | 18th, Spet 2026 | Category: Technical Guide A closed loop is never one piece of rail. It is straight sections, arc segments, and the joints between them — and on a line that is not meeting its positioning specification, the joints are where to look first. This page covers the dimensional facts that govern joint quality, what they mean when tolerances accumulate around a closed loop, what the carrier actually experiences as it crosses a joint at tolerance, and how to tell a joint problem from a preload problem in about thirty seconds. Three facts ...
Read more
What Is Circular Conveyor Positioning Accuracy: What Sets It, and Which Figure Applies to Your Line
September 17, 2026
Technical Guide
What causes Circular Conveyor Positioning Accuracy? Author: ChangMing |17th, Sept 2026| Category: Technical Guide There is no single positioning accuracy figure for a circular conveyor. There are three, and which one applies depends on two things: whether the line has a secondary positioning mechanism, and what drives it. Quoting the best of the three against a line that does not have the hardware to achieve it is the most common specification error on this product, and it is usually discovered at commissioning, when the process equipment above the carrier will not repeat. Configuration Repeat positioning accuracy ...
Read more